9VBR

9V Battery Replacement Module


9VBR -- $70 (plus shipping)

The 9VBR supplies a regulated power source that connects to your 9V battery powered device through the standard 9V battery connector to allow continuous use of your 9V battery powered devices.


Many pieces of Physiometry equipment, well many small pieces of equipment designed for a wide variety of uses, are powered by the readily available 9V battery. This workhorse of a power source has been around for decades, and still sees wide use in many industries.

Many UFI instruments are powered by the 9V battery too. When this is the case, our engineers work to keep the amount of power drawn from the 9V battery low. This supplies as long of a battery life as possible.

But this is the question. What if you want or need to operate a 9V battery powered gizmo continuously?

The 9VBR is the answer! The name stands for '9V Battery Replacement'. And no, it is not just any cheap Wall Mount power supply. We start with a power supply that already includes the DC rectification. We add 'in-line' full regulation down to 8.0V which is approximately the half-way point of a 9V battery power curve. We do this to make sure the input range of the input regulators of your device is never exceeded. Of course, we add generous filtering, too. The 9VBR has a maximum continuous working current of 100 mA which is probably more than any 9V battery powered equipment will ever need.

To use, just pull the battery cover off your device, remove the 9V battery from the clip (by pressing your thumb along the long side of the clip and pressing away from the battery). Connect the battery clip on the 9VBR to the battery clip on your device; the polarity should already be perfect! Of course, you need to connect the 9VBR wall-mount power supply to 110V! Next, turn your 9V battery powered gizmo on, and leave it on!!!

9VBR -- $70 (plus shipping)

The 9VBR supplies a regulated power source that connects to your 9V battery powered device through the standard 9V battery connector to allow continuous use of your 9V battery powered device.

By the way... Here at UFI, we often supply equipment that is 9V battery powered in order to simplify the overall subject isolation requirements for your subject connection. The 9VBR uses a transformer that isolates the 110V side from the low voltage connections. If your equipment is subject connected, ask your IRB if this device is suitable for your use. We can measure the leakage current of your 9VBR and supply that data to you. There is an extra charge for this.


Order Your 9VBR!

-- I Just Want my 9VBR!

Payment via Credit Card (MC/V only) is the fastest way to place your order. This is the information we need:

If simplicity is your game, just copy the outline above, then paste it into an EMail! Of course you need to change it to show your details. Next, change the EMail 'Re:' field to say 'UFI 9VBR Order' or something similar. The EMail address needs to be mail@ufiservingscience.com and maybe double-check that!

Hit Send... boom... done!

-- Ok, lay it all out for me

Product Families:
Transducers
Electrodes
Bioamps/signal conditioners
Ambulatory data loggers
Hot Flash Recording
BAERCOM™ hearing tester
PC-based instruments
Multi-subject systems
Test instruments
(Home)